Should an MD be required to read Cone Beam Scans?

For the bulk of the dentists using CBCT images for implant planning we are “reading” our own scans. Does anyone have a legal opinion as to weather a radiologist should be reading these?Especially the limited FOV images?

21 Comments on Should an MD be required to read Cone Beam Scans?

New comments are currently closed for this post.
Dr. Steven Kollander
11/21/2017
Please start to cull the wacky questions from what is posted, such as this one.
DrG
11/21/2017
Why is this wacky?
drphil
11/21/2017
It's not a wacky question at all. Wait till some dentist gets sued for misinterpreting a scan, and the question is asked why they didn't get a radiologist to review it.
Florentino Afonso
11/21/2017
Not an MD but an Oral And Maxillofacial Radiologist would be the appropriate person to have them interpreted if ther are any issues. If you take a CBCT you need to be qualified to interpret the images. If you are not qualified or have some doubts regarding the interpretation it would be appropriate and sensible to have an Oral Radioloist look at the images and provide a report.
John D Mahilo
11/21/2017
Sure...and panoramic films and why not PA’s and BW’s.....and intraoral photos too....we need real doctors to do the important stuff. We will have more time then to assist the mid level providers.
Robert J Miller
11/21/2017
What are they going to overlook? Do you read panorex's? Does this pathology show up on other radiographs. Missed pathology can occur in any radio graphic modality. If we are considered the physicians of the oral and maxillofacial region, it is incumbent upon us to take courses updating our knowledge of radiographic interpretation, regardless of modality. I keep hearing this canard every time we talk about CBCT. What are the legal precedents for this. Has there actually been a case of a clinician being sued for missing pathology? And if you can point to a clinician who has been negligent in reading a scan, is that sufficient to ban ALL non specialists from interpreting scans from their own practices? This is politically motivated, and nothing more. RJM
Raul R. Mena
11/21/2017
It is pitiful what dentistry is becoming. Any well trained dentist should be able to read a CT. This has turn in to a turf war. Of course they are going to tell you to send the panorex to be read by a Radiologist. The main reason is that they need to be able to make a leaving. Money Money Money. Sorry if I have offended any one. It is harder to diagnose from a panorex than from a CT CBCT.
DrG
11/21/2017
My thoughts are is a limited FOV we are well within our training to interpret the images. Where we might get in trouble is when the field is extended to the base of the skull and spine areas. Where is get this question is when a local dentist asks our office to provide them with a CBCT for one of their patients. They expect a report to accompany the CD we provide. I think there is the area where we could find tricky. This begets the next question, if we write a report are we able to charge for that interpretation separate from the images themselves????
DrG
11/21/2017
Sorry for the mistypes....
Scott D Ganz
11/21/2017
Really..? Well we do have issues to discuss because Dental school curriculum has generally been deficient in training clinicians to read and interact with CBCT scans. Likewise most MD radiologists are not trained to appreciate Dental pathology, or ideal implant receptor sites. Therefore, I agree that the OMR is the correct specialty to review CBCT images by dentists. Our profession needs far more education in 3-D Imaging and how we now combine technologies to fully diagnose, treatment plan, and link to 3-D printing and CAD CAM applications... Some of us have dedicated our careers to pushing this agenda ... which has become increasingly more important each year. But bringing in an MD...? Not the right discussion in my opinion.
Raul
11/21/2017
Scott, So how about all those GPS that you have trained to read CBCT, did they waste their time going to your lectures. I am sure they benefited from it, I know that you provide excellent training in the subject. You have probably trained more GPS than the number of OMS practicing in the USA. No doubt that today's OMS are trained to read CBCT, but that does not mean that in order to diagnose pathosis wit a CBCT needs to be referred. By the way lately dental schools have a tendency of teaching how to refer , enter codes for bleaching, and bondings , and do soft tissue treatment. Keep up providing your training course, the profession benefits from it. Sincerely, Raul
D.Yamamoto
11/21/2017
It is illegal in the State of California to take a CBCT scan for a referring dentist unless the patient is “your” patient too. When you are taking scans for any other office “You” are responsible for the scan. If you miss pathology it falls on you and not the doctor who requested the scan because now you have become a scanning lab. Oral Maxillofacial Radiologists are well educated and this is what they do for a living. In Medical Radiology the Radiologist is not well trained in Oral interpretation. One of my referring Dentists acquired a full height scan (FOV 13cm) on a patient from a lab that gave him a great price but too large of a FOV and was subsequently sued for missing a squamous cell carcinoma in the right maxillary sinus. I never take scans larger than 6cm high for upper or lower arches. In Radiology we are taught to collimate to the area of interest which everyone should be doing. Protocol will vary depending on manufacturer and person taking the scan. I can read scan pathology better than most of the doctors who send to me, so don’t assume that just because you are a Dentist you should be able or are able to interpret these scans. I vehemently believe that if you were to request a Radiologist Report on each of your scans you will have a better understanding of what you do not know and also how metal artifacts interfere with interpretation. Unless you’ve studied artifacts and have seen scan after scan you will never really understand how artifacts affect 3d images.
Robert J Miller
11/22/2017
You can diagnose a squamous cell carcinoma from a CBCT scan? I thought that required a biopsy? Failure to REFER a suspicious lesion on a CBCT scan to a clinician who can diagnose/treat the case is certainly a breach. But I submit that a single anecdotal case does not serve as grounds to deny the right of a clinician to diagnose from their own CBCT scan. In fact, on a panorex conversion from my scans, I find that it is far more difficult to diagnose pathology than when I look at both the panorex AND sectional tomographs. Additionally, when we take our scans we only expose the area in question for diagnosis and treatment planning. We do not extend to the base of the skull, occipital or spinal areas. This mitigates out many of the potential problems from "missed" pathology (i.e. calcified carotid arteries). RJM
Dr. Gerald Rudick
11/22/2017
"BUYER BEWARE !!!!!" Cone beam technology has revolutionized dentistry in a very positive way...... however, remember, wherever you have new technology...you also have lawyers and " wise guy ignorant bureaucrats " working for the local licencing bodies lurking in the background who's job it is to find some minute detail you might not have noticed, and to make a federal case out of it. Protect yourself....when ordering or taking a scan, have the patient sign a consent form mentioning that you preferred to have this scan reviewed by a medical radiologist, and that this was not done because the patient refuses to pay an additional fee..... this way if you did not pick up something serious on the scan, that may or not be related to dentistry, it is not your fault.
Raul
11/22/2017
I agree with Dr. Miller, Dr. Rudick , We need to protect ourselves from many angles. 1 Attorneys 2 Colleagues that are always ready to be critical of members of their own profession without regard to clinical results. 3 Some Specialist trying to corner every corner of the Dental Turf 4 Equipment manufacturers that want to promote their equipment with scarring tactics. 5 Dental Schools teaching below the standard of care. If you want to obtain a CBCT consent from the patient, it should be a simple and practical consent . Have the patient sign a consent that the only purpose of the CBCT is for diagnosing Dental Conditions , of course the consent should not be limited to that only sentence. Lets not be part of the spreading philosophy that GPs should only be doing Bonding, Bleaching, and Soft Tissue Management. Raul R. Mena DMD Diplomate ABOI-ID Oral-Cranio-Maxillofacial Implant
Manosteel
11/22/2017
You are absolutly right! After 38 yrs in practice I have concluded that,Dentists are just a bad lot especially to each other. The easiest thing in Dentistry to do is to get one Dentist to bash another! Periodontists and Orthodontists, being the absolute worst!! They are always whinning about how incompetent everyone else is except them. I have a certificate in Prosthodontics and am a FICOI. Studied with Misch, Pikos, Garg,Al-Farajie among others. I never obtained board certification because it never seemed to mean anything to anyone, (especially other Dentists) except to cover up a bad spot on the wall with a plaque!!!!
Manosteel
11/22/2017
To my knowledge you are only responsible for anything that shows up in the FOV. I have had a cbct machine for about a year and it opens up a whole different view of things once you learn how to use it and understand the slicing. Getting an MD or a Radiologist involved is kind of like saying you cant read the images or other x rays, its another thing you have to learn! If you are too incompetent to learn or understand cbct imaging maybe you shouldn't be doing implants and relegate yourself to simple fillings, prophys,exams and referral to other specialists.
CRS
11/23/2017
I'm an Oral Surgeon and I can read a CT only when it relates to my area of expertise. If I am unsure I will show the scan to my radiology colleagues or my dental colleagues. I feel the tone of this thread is not to utilize referrals or another set of eyes to interpret. Unfortunately in dentistry with the exception of OMS, folks are for some reason uncomfortable with consultations. The pathology could be missed I see it daily in my office even with a simple panorex. I have an ENT colleague who helps me also. It is not a weakness to consult everyone benefits. As soon as I see a lot of credentials and courses posted I ask what that has to do with the advice. If you want to grow and learn, do the best thing for your patient and your practice work with someone you trust and that can give you an honest answer not their ego. I try to learn from many sources also have been fooled with some of the dental artifacts on CBCT that's when I ask a dentist who knows more than me. We had a saying in residency "if the radiologist says there is a fracture, then there isn't!" Anyway I can't read a chest film to save my soul and periapicals confuse me too! Take care be safe and wise, a lawyer would love to nail a missed diagnosis!
Raul
11/23/2017
CRS, Very wise advice, but you are missing the point. Not every scan needs to be read by a radiologist, I am sure that is not costumary in your practice. By the way I hope that any well trained dentist will have enough knowledge to know when and when not to refer.
CRS
11/23/2017
I stated when I am unsure then I get a consult, that is my point. And that is coming from an very experienced Oral Surgeon who has been reading Xrays and CTs for a very long time. You missed my point, just clarifying.
Raul
11/25/2017
CRS, Can you give a good example of a CBCT taken for placing implants that you have referred to a Dental Radiologist?

Featured Products

OsteoGen Bone Grafting Plug
Combines bone graft with a collagen plug to yield the easiest and most affordable way to clinically deliver bone graft for socket preservation.
CevOss Bovine Bone Graft
Make the switch to a better xenograft! High volume of interconnected pores promotes new bone. Substantially equivalent to BioOss and NuOss.