Soft tissue dehiscence after uncovery: recommendations?

I have a 50-year old patient who has a chronic smoking habit but otherwise non-contributory medical history. I had placed 6 implants in the maxilla 4 months ago with 2 in the right and left maxillary posterior after sinus lifts. Patient returned and is healing well and I uncovered the implants. 2 implants had been overgrown by bone which I cut away to uncover them. I then placed healing caps. I scheduled the patient for impressions. After 1 week, the patient has come back for the impressions, and I see bone is visible on the lingual side of the healing abutments (2 implants), though threads are not visible. I debrided with plastic tipped scalers and irrigated with chlorhexidine and hydrogen peroxide. Any recommendations on how I should precede at this point?

13 Comments on Soft tissue dehiscence after uncovery: recommendations?

New comments are currently closed for this post.
Ninja
8/9/2017
The goal is to cover exposed bone by whatever option available and there are a few. One would be coronal repositioning of the flap, PTFE membrane, tissue graft.
Larry Silverman
8/9/2017
Just wondering why an impression is required after soft tissue is manipulated 1 week prior? Is this for final prosthesis?
Dr.Benjamin Ghotbi
8/9/2017
This is what I would do, Leave it until 4 weeks . The bone will be covered on its own then taken impression . Justbe patient little more.
Ninja
8/9/2017
With all due respect Dr. Ghotbi, in four weeks you can be surprised by bone resorption and implant exposure. It will depend on who wins the race, the bone resorption or the soft tissue healing. Obviously, the thickness of the bone plate in that are will have something to do with that race. Is it worthy the risk? That depends on the gambler.
WJ Starck DDS
8/9/2017
Interesting case, thanks for sharing. How much exposed bone are we talking about? A sliver? 1 mm? 2 mm? More? How did you remove the bone that was covering the cover screw? A drill? I suspect that if you used a drill you overheated that palatial bone -or- you beat up the palatal flap too much when doing your dissection? When I have to uncover something I only use a room heir and/or a 15 blade. Anyways, you have a region of dead bone. I don't think covering it with any kind of advancement flap at this stage will work because it will just dehisce. I think you will have to wait until the dead area declares itself an sloughs. That will most likely leave you with exposed threads. At that point you could reflect a flap, etch the exposed area, then regrant the exposed area. Be generous with the size of your flap and score the periosteum on the underside of the flap to release tension. Then make sure you have a tension-free closure. And tell that patient to quit smoking ;)
WJ Starck DDS
8/9/2017
And when I don't have a room heir available, I use a rongeur. Stupid autocorrect
CRS
8/10/2017
Can't give any useful advice without an X-ray or clinical picture. I suppect that after exposure either a thin maxilla with implants placed too far to the lingual, rough exposure during healing head placement, smoking, manipulation by the patient's tongue. I do know one thing I would not have scraped the area with plastics scalers and used H2O2 and CHX to further traumatize the area. The appearance of the bone is key. Exposed bone is usually dead bone which will slough. Any healing granulation tissue most likely was removed by your premature intervention. Most of the listed comments won't help you, show a lack of understanding of surgical healing process. Hope you have a good informed consent. Let it heal and restore, palatial exposure is difficult to fix. Clinical judgement.
David
8/10/2017
Agree with CRS. Palatal tissue is fixed/attached tissue. There is no mucosa to allow you to advance it like with facial tissue. Good luck!
WJ Starck DDS
8/11/2017
That is not correct. A finger flap can be rotated into place to provide coverage should the need arise
Ninja
8/10/2017
CRS would like to see an x-ray to evaluate palatal exposure. A periscope would do better. We tend to exaggerate just about everything for whatever reason. Call it professional liability. We all had experiences like this and everything ended well. Open limb fractures are treated without complication and a little bone exposure in the mouth will heal as well. Removing healing abutment and non-resorbable membrane like PTFE will solve the problem for sure. We take teeth out, graft bone and place a PTFE membrane according to protocol for the use of that type of membrane and much more bone gets covered. With the knowledge you most likely already have, you will find a solution.
elijah arrington
8/10/2017
Leave it alone; let it heal via secondary intention
Haydar G. Alkhatib
8/11/2017
Exposed bone is dead bone , grafting over it will do nothing and will fail , you can't do anything right now just wait and see secondary healing takes place and hope for the best (been in the same situation with a smoking patient their lack of soft tissue healing potential will leave you frustrated sometimes), schedule weekly appointments to remove dead bone sloughs and make the patient use cotton swabs with CHX in this particular area.
Kevin
8/11/2017
A picture would be helpful, but I agree that discretion makes sense. Let it heal and see what happens. Definitely, stop or reduce smoking ASAP. In general, I would wait at least 3-4 weeks before taking an impression. Good luck

Featured Products

OsteoGen Bone Grafting Plug
Combines bone graft with a collagen plug to yield the easiest and most affordable way to clinically deliver bone graft for socket preservation.
CevOss Bovine Bone Graft
Make the switch to a better xenograft! High volume of interconnected pores promotes new bone. Substantially equivalent to BioOss and NuOss.