Suggestions for a more predictable and aesthetic 2nd-stage technique?

I have a female patient with high aesthetic demands for whom I am replacing a single missing maxillary central incisor. Her tissue biotype is medium. I placed a 4.1x10mm Straumann BLT RC implant 3mm apical to the cervical margin of the adjacent central incisor. I marked the cervical margin on the adjacent central. I placed the implant, grafted, placed a cover screw and closed. The patient has returned after 4 months have passed, and I am treatment planning the second stage. My plan is to initially place a modifiable PEEK abutment, then place her in a screw retained temporary crown to assess gingival margins before definitive restoration. What are preferred methods for second stage surgery which leave an adequate thickness of gingiva labially? I often use a modified roll technique to bring some of the tissue covering the implant labially (a sort of poor man’s CT graft), but I find that I often see some diagonal scarring adjacent to the thickened gingiva at the joint. This has not worked well for some patients. Any suggestions for a more predictable and aesthetic 2nd stage technique?



4 Comments on Suggestions for a more predictable and aesthetic 2nd-stage technique?

New comments are currently closed for this post.
rsdds
9/26/2017
I like your placement You'll have nice papillas . I think you're in the right track soft tissue follows bone best. nice case thanks for sharing
kent hamilton
9/26/2017
do you have a photo before you flapped the area?
Vipul Shukla
9/26/2017
I think your worries are misplaced. Mid-crestal incision and then a well made provisional crown is fine. This case does not appear to be compromised. You seem to have a ton of keratinised tissue. Implant placement appears beautiful as well. Keep surgical site clean, use chlorhexidine for a rinse during the surgery and for a week after, smooth emergence profile of the PEEK abutment and the polished lab made (preferably) acrylic provisional crown and proper oral hygiene afterward will all go a long way towards a satisfactory result. A screw-retained crown is possible but will be unaesthetic. Wait 6 to 8 weeks for papillae to stabilize then make a polished Porcelain fused to zirconia cemented crown on an appropriate milled CARES zirconia abutment and then open a cold beer to celebrate. Cheers!
joe nolan
9/27/2017
If you can show a picture of the area at this time it could help ? Additive flowable to a screw in temporary abutment to bulk out the tissue is what I learned...George Priest shows this on a VivaLearning webinar....you then need a custom technique using silicon and a temporary abutment yet again, with the use of flowable to register the developed sulcus in order to get the emergence profile copied...are you aware of the technique?

Featured Products

OsteoGen Bone Grafting Plug
Combines bone graft with a collagen plug to yield the easiest and most affordable way to clinically deliver bone graft for socket preservation.
CevOss Bovine Bone Graft
Make the switch to a better xenograft! High volume of interconnected pores promotes new bone. Substantially equivalent to BioOss and NuOss.